Forum Discussion

ZZhan108's avatar
ZZhan108
Icon for New Contributor rankNew Contributor
6 years ago

Problem on downloading bitstream to a Stratix 10 MX board

Hi all, Now I'm trying to programming the Stratix 10 MX board with a simple test example (4-bit counter). Following are my hardware and software info: Software: Quartus Prime Pro 19.3 Hardware: St...
JohnT_Altera's avatar
JohnT_Altera
Icon for Regular Contributor rankRegular Contributor
6 years ago

Hi,

1) The position and explanation of the SW2 is correct. The direction is from bottom to top. SW2-1 is JTAG Input, SW2-2 is M10, SW2-3 is PCIe RT, SW2-4 is S10.

2) The correct default setting is based on the Table 3 or the expanded switch. Please do not follow the exact board switch setting.