Problem in getting and compiling u-boot for cycone V soc fpga DE10 Nano as per step 3.2 of this tutorial - https://bitlog.it/hardware/building-embedded-linux-for-the-terasic-de10-nano-and-other-cyclone-v-soc-fpgas/ using SoC EDS command shell on windows

Hi, Please follow the Rocket Boards description, it is well tested and supported with the pre-compiled files which will make your life easier. in the link below select Cyclone V and the Quartus version you are using and action required. https://rocketboards.org/foswiki/Main/GettingStarted These are very useful references, please check them: https://rocketboards.org/foswiki/Documentation/GSRD https://rocketboards.org/foswiki/Documentation/GSRDBootFlow https://rocketboards.org/foswiki/Documentation/GSRDBootLinuxSd Regards.