How to create a design with DDR3 memory?

Hi AMaga2,

You can get started with generating the example design from the IP parameter editor first, and work with that design to get an idea of how everything should work by referring to this chapter 13.3 (Uni-PHY Based Example Design) of the external memory handbook:

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/external-memory/emi_ip.pdf#page=406

You can also check out this online training. It's older, but still completely applicable:

https://www.intel.com/content/www/us/en/programmable/support/training/course/omem1110.html

Hope this helps.

Thanks

Regards,

NAli1