Forum Discussion

Occasional Contributor

7 years ago

Error: The target hardware identity could not be verified. Please check that the target being connected to is of type Cyclone V SoC (Dual Core)

HI all, Noob here... I'm just getting started with Cyclone 5 SoC based dev. I have a De10-Nano board. I can program the FPGA section from Quartus without problem. I can run HelloWorld from DS5 ....

MCOUNSELL

Occasional Contributor

7 years ago

Thanks, when you say initialization issue do you mean initialization of the HPS by preloader?

EBERLAZARE_I_Intel

Regular Contributor

7 years ago

Hi,

Yes, proper steps needs to be followed to bring up the board. More info can be found here:

https://rocketboards.org/foswiki/Main/GettingStarted

You can choose > Cyclone V > the Quartus Version > any topic that you want to look into.

Regards.

Forum Discussion

Error: The target hardware identity could not be verified. Please check that the target being connected to is of type Cyclone V SoC (Dual Core)

Recent Discussions

Unique ID registers in Cyclone V

Audio interface with Agilex 5 A5ED065BB32AI4S

Operating system kernel-level FPGA bridge communication

Routing PL DDR to PS

Validating ECC Functionality on Custom Agilex 5 SOM in Linux Kernel