Forum Discussion

MCOUNSELL's avatar
MCOUNSELL
Icon for Occasional Contributor rankOccasional Contributor
7 years ago

Error: The target hardware identity could not be verified. Please check that the target being connected to is of type Cyclone V SoC (Dual Core)

HI all, Noob here... I'm just getting started with Cyclone 5 SoC based dev. I have a De10-Nano board. I can program the FPGA section from Quartus without problem. I can run HelloWorld from DS5 ....
EBERLAZARE_I_Intel's avatar
EBERLAZARE_I_Intel
Icon for Regular Contributor rankRegular Contributor
7 years ago

Hi Mike,

There is one regarding "failed to load client library", but the workaround is upgrade to SoC EDS v14.1:

https://www.intel.com/content/altera-www/global/en_us/index/support/support-resources/knowledge-base/solutions/fb152500.html

You could find more in the KDB article link here, by searching "DS-5 USB" , etc..:

https://www.intel.com/content/www/us/en/programmable/support/support-resources/knowledge-base/kdb-filter.html

I appreciate if you could elaborate on what you meant by, "rock solid or flakey"?

Thanks.