Forum Discussion
HUl_H
New Contributor
New ContributorEnabling FPGA2HPS Bridge in Uboot Hangs the Kernel
I am using Cyclone V SOC on De10 Nano kit. I have added Frame Reader IP in QSYS to HPS which uses FPGA2HPS bridge. I am programming FPGA via Uboot. When Uboot loads the RBF file and run "bridge_enabl...
YoshiakiS_Altera
Occasional Contributor
Occasional ContributorPlease confirm the register value by below command.
"md ffd0501c 1"
Next, a write command is below.
"mw ffd0501c 0"
