Forum Discussion
MF28
New Contributor
New ContributorData Communication Time to high
Hello! I am currently using HPS and the FPGA together. I am communicating between them via the lightweight AXI Bridge. On the FPGA I also have LXDE Linux running. In order to test the maximum s...
EBERLAZARE_I_Intel
Regular Contributor
Regular ContributorHi,
I see, not necessarily use Nios II processor in your design.
Better yet, you could try for example, use signal tap etc, on Bare metal or U-boot rather than Linux, for example try to tap the signal when reading/writing in U-boot registers using for e.g. , the "md mw" command in U-boot.
