Forum Discussion

Rleduc's avatar
Rleduc
Icon for New Contributor rankNew Contributor
3 years ago

Cannot open bsp-editor with SoC EDS Pro 19.1 on Linux

Hello all, After having struggled for too long, I had to come here to seek for help. I want to work on SoC-FPGA projects with Intel Arria 10 board: Terasic HAN Pilot , which for information, an...
EBERLAZARE_I_Intel's avatar
EBERLAZARE_I_Intel
Icon for Regular Contributor rankRegular Contributor
3 years ago

Hi,


Thanks for contacting Intel Forum support.


Glad your Quartus compilation was a success. I believe you have set the boot selection to FPGA in Platform Designer?


Regarding the bsp-editor, for A10 and even CV currently, we are no longer using the bsp-editor to build the A10 Bootloader.


For full compilation and the build, we always refer here for our A10 SoC Dev Kit (SD card boot):

https://www.rocketboards.org/foswiki/Documentation/BuildingBootloaderCycloneVAndArria10#Arria_10_SoC_45_Boot_from_SD_Card


More info:

https://www.rocketboards.org/foswiki/Documentation/Arria10SoCGSRD


The boot from FPGA that you shared is very old and quite obsolete, and currently only used for reference.


Please allow me some time, to check with our internal on this particular example to boot from FPGA using flow w/o bsp-editor.


This might takes a few days in fact.