Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Using internal Clock of DE2 in Quartus-Verilog

Hi there, I'm very new to verilog and quartus, but I'm trying to build a digital clock. I've set up the counters (I think) for seconds minutes and hours. But what I am unsure about is how ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

The DE2 has an on-board clock source connected to an FPGA pin.

This thread has an example top-level design for the DE2-70 board;

http://www.alteraforum.com/forum/showthread.php?t=33462

Take a look at Post#5. It has instructions on how to build the design.

The design does not have a hours-minutes-seconds clock, but it does control the LEDs and hex-displays, so it will give you a good starting point.

Cheers,

Dave