Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

USB Blaster JTAG pinning on board

Hi community, in the UG-01150 PDF "USB-Blaster II Download Cable Specifications" on page 2-4 table 2-2 there is a signal name I can't find on MAX10 device. The name is PROC_RST. Is this pin ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

Reading the specification thoroughly tells you that the signal is for hard processor reset. Hardly used with MAX10.