Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

TimeQuest "Warning: Ignored filter ... could not be matched with a port"

I used the TimeQuest Timing wizard to generate an SDC file with setup and hold timing constraints. Here is a snippet from the file: set_input_delay -clock "sinclk" -max 18ns set_input_del...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

I had already compiled the design, but I didn't realize that the Timing Netlist hadn't been created yet when I re-opened TimeQuest. The Name Finder option appeared after that. Thanks for listing the command line interface commands.

It looks like all the port names are valid. I've attached some screen shots that show them listed.