Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

timequest report timing and quartus II compilation report

Hi, My design did not meet timing. So, I used the DSE to meet the timing of the design. I used those options in the quartus II compiler and ran the full compilation. The compilation showed ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

After opening the Timing Analyzer double click under "Tasks" on the left side on "Set Operation Conditions..." and select the conditions you want to analyze the timing model in.