Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

timequest report timing and quartus II compilation report

Hi, My design did not meet timing. So, I used the DSE to meet the timing of the design. I used those options in the quartus II compiler and ran the full compilation. The compilation showed ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

Hi,

Thank you for the reply.

Yes, there are setup and hold time violations reported in the compilation report for the slow 900 mv 0c and fast 900 mv 0c model but no violations for the slow 900mv 85c model. But when i try to open the timing report by right clicking both the setup and hold violations, no violations are found in the timequest analyzer gui.