Forum Discussion

MShek2's avatar
MShek2
Icon for New Contributor rankNew Contributor
6 years ago

Stratix II Family - EP2S90F1020. What program to use?

Dear Intel Employee,

I have device Stratix II Family - EP2S90F1020. Your website offers Quartus Prime / II Version (Standard / Subscription) 13.1v and Quartus Prime / II Version (Lite / Web) 11.0sp1 that are not applicable and gives an error message "Error: There is no valid device available", however your website contains information that this version is for this device. Could you please advise what program i can use on what windows version? Thank you in advance!

2 Replies

  • MEIYAN_L_Intel's avatar
    MEIYAN_L_Intel
    Icon for Frequent Contributor rankFrequent Contributor
    6 years ago
    Hi, I apologize for the late reply. Referring to the website http://fpgasoftware.intel.com/devices, Stratix II family is supported in the Quartus Prime / II Version (Standard / Subscription) 13.0sp1 but not 13.1. I found out that there are hyperlink errors on the Quartus version for Stratix, Stratix GX, Stratix II, Stratix II GX and Stratix III. Clicking the link directs me to the webpage for the Quartus Prime / II Version (Lite / Web) 13.0sp1 software, which is not supporting Stratix II family. The correct link to download the Quartus Prime / II Version (Standard / Subscription) 13.0sp1 is as below: http://fpgasoftware.intel.com/13.0sp1/?edition=subscription Also, I had verified that both the Quartus Prime / II Version (Lite / Web) 11.0sp1 and Quartus Prime / II Version (Standard / Subscription) 13.0sp1 are supporting Stratix II family device. Thanks.