Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

selecting parameter based on reg value - verilog

Hi , I have a set of parameters ( constants ) . I want to select one parameter at a time based on a register value (ex. reg [3:0] sel_value ) . Or i need to conditionally instantiat...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
13 years ago

The reg value can to be fed to the module as input port to allow selection of a specific parameter inside the module. Or select the parameter outside the module and give the actual paramter value to the modulethrough a port.