Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Scripting the process of programming the EPCS on the DE0-Nano dev board.

I have just been through the steps of taking my SOF file and converting it into a filetype that can be programmed into the EPCS device on my DE0-nano development board i.e. http://geobyjmhembeddedeng...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

After a little reading around and playing I found a solution to my question :cool:. The process can be scripted in a batchfile as follows: 


copy onehertzled_top.sof de0nano_pmg.sof
C:\altera\12.1\quartus\bin\quartus_cpf -c de0nano_pmg.cof
C:\altera\12.1\quartus\bin\quartus_pgm -c "USB-Blaster " de0nano_pmg.cdf
pause

If you want more detail I have written up my findings in a blog post: http://geobyjmhembeddedengineer.blogspot.co.uk/2014/06/scripting-process-of-programming-epcs.html

Regards

geobyjmh

http://geobyjmhembeddedengineer.blogspot.co.uk/