Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Regenerating the system in SOPC

Hi @ All! I have a several VHDL design files which are included as a component in the SOPC Builder system and connected with an SDRAM Controller. Everything works except for some bugs. My...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Hi,

As far as I know, you must regenerate through the SOPC builder any time you change the SOPC system itself. If the change is only in your other project modules then obviously you don't. Quartus simply uses the module built in SOPC just like any other module.

Kaz