Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

Quartus Prime Programmer JTAG Error Codes

Hello, I am attempting to program a 10M50DCF with a Quartus Prime Programmer and a USB Blaster via JTAG. I have loaded the proper drivers, setup the hardware, and loaded my .pof. When...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

Thanks for the quick reply Vinhael.

I was unable to auto detect the device in the JTAG chain. This led to a discovery that the pinout for the programming header on the board did not match the USB blaster. I was able to correct this and the device programmed as expected.

I would still be interested in a document that covers the error codes if anyone has it.

Thanks!

- Keith