Forum Discussion

William_Stroupe's avatar
William_Stroupe
Icon for New Contributor rankNew Contributor
3 years ago

Quartus Prime Lite compatibility with bladeRF 2.0 micro xA9

I want to be able to use Quartus Prime lite in a pilot Project to develop a customized Cyclone V image for the Nuand bladeRF 2.0 micro xA9 development board. (https://www.nuand.com/product/bladeRF-xA...
ShengN_altera's avatar
ShengN_altera
Icon for Super Contributor rankSuper Contributor
3 years ago

Hi,


Yes, this board is compatible/supported by Quartus Prime lite. And you can use VHDL or Verilog in this effort without requiring a license because Quartus Prime lite don't requires a license.

As for bladeRF 2.0 micro xA9 development board programming part, may be you can open a new thread in FPGA, SoC, And CPLD Boards And Kits forum https://community.intel.com/t5/FPGA-SoC-And-CPLD-Boards-And/bd-p/fpga-soc-cpld-boards-kits to get related expert's help.


Thanks,

Best Regards,

Sheng


William_Stroupe's avatar
William_Stroupe
Icon for New Contributor rankNew Contributor
3 years ago

Thanks so much, Sheng!