Forum Discussion

Moog7406's avatar
Moog7406
Icon for New Contributor rankNew Contributor
4 years ago

Quartus II design software for Cyclone II

Hello,

We have old design for Cyclone II and would like to verify our design for a short period of time. would like to know which Quartus II design software will be able to work with Cyclone II, do we need buy license or is there a web version available for 30 days?

Thanks

2 Replies

  • RichardT_altera's avatar
    RichardT_altera
    Icon for Super Contributor rankSuper Contributor
    4 years ago

    Hi @Moog7406

    You may check which Quartus version supported for specific device by using the webpage below. Quartus 13.0 is supported for Cyclone II.

    https://www.intel.com/content/www/us/en/programmable/downloads/download-center.html

    No license is required. The Quartus Prime Lite Edition, Quartus II Web Edition, and ModelSim-Intel FPGA Starter Edition versions 8.1 and later do not require license files.

    Best Regards,
    Richard Tan

    p/s: If any answer from the community or Intel support are helpful, please feel free to give Kudos.

  • RichardT_altera's avatar
    RichardT_altera
    Icon for Super Contributor rankSuper Contributor
    4 years ago

    Hi @Moog7406

    I’m believe that I have answered your question. With that, I now transition this thread to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you.

    Best Regards,
    Richard Tan

    p/s: If any answer from the community or Intel support are helpful, please feel free to give Kudos.