Forum Discussion

Ben_C's avatar
Ben_C
Icon for New Contributor rankNew Contributor
5 years ago
Solved

Qsys update

Hi I have a big qsys file (platform designer) Quartus Pro 19.4. I migrated successfully to 20.3. I tried migrating from 20.3 to 20.4 I get this error: Info: E:/Buildscript/LPUX274_20_4/src/qsys...
  • RichardT_altera's avatar
    RichardT_altera
    5 years ago

    Hi Ben,


    I have sent an email to you. Please help to check.


    Best Regards,

    Shyan Yew


SLabe's avatar
SLabe
Icon for Occasional Contributor rankOccasional Contributor
5 years ago

@RichardTanSY_Altera , I emailed you the Qsys. Good day and thank you,

RichardT_altera's avatar
RichardT_altera
Icon for Super Contributor rankSuper Contributor
5 years ago

I tried to open the qsys.qsys file that you provided.

Unfortunately I don't see the error message pop up, other than the warning messages pop up saying a lot of IP files missing.

Have you try to uninstall/reinstall the Quartus and try to migrate the project again?

  • SLabe's avatar
    SLabe
    Icon for Occasional Contributor rankOccasional Contributor
    5 years ago

    Very sorry, the Qsys we'd shared was 20.3... I've emailed you the 20.4. Let us know of you findings, thank you.

    • SLabe's avatar
      SLabe
      Icon for Occasional Contributor rankOccasional Contributor
      5 years ago

      This is the screen you should get when opening the latest Qsys. Thank you.

  • Ben_C's avatar
    Ben_C
    Icon for New Contributor rankNew Contributor
    5 years ago

    Hi Shyan Yew

    I have sent you the file by e-mail

    regards

    Ben

    • RichardT_altera's avatar
      RichardT_altera
      Icon for Super Contributor rankSuper Contributor
      5 years ago

      Sorry for the delay in response. I just back from CNY break.

      I open the new qsys file again and I got the same scenario as the previous file - not able to duplicate the error and system completed with warnings saying: Failed to instantiate file.

      Here's the flow that I go through. Let me know if there is a different flow with yours.

      1. Open a new project in Quartus Pro 20.4
      2. Add the qsys.qsys file in the project
      3. Launch the IP upgrade editor.
      4. Open the qsys file in Platform Designer.
      5. System completed with warnings. (see below)

      • Ben_C's avatar
        Ben_C
        Icon for New Contributor rankNew Contributor
        5 years ago

        Hi Shyan Yew

        You must have 2 qsys.qsys file (sorry with the same name). One in 20.3 (sent by SLabe) and the other one in 20.4 that I sent by e-mail.

        The one in 20.4 doesnt ask for upgrade when I follow your steps and gives the error.

        Make sure you choose this part for the project
        10AX057H3F34I2LG