Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

Pins not connecting in Quartus

Excuse the ignorance but this is my first time dealing with Quartus. I have followed my text's instructions word for word and rebuilt circuits and subcircuits numerous times and each time I go to run...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

Did you assign the X and A signals to specific pins? It's just an information that you might have forgotten to do so.

If you are simulating the design, simply ignore the warnings, If you are going to run the design on a specific hardware, e.g. a development port, you should know which pins have to be connected.