Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

"No output dependent on input pin" error

Several warnings were generated during compilation, but they all are secondary to the following: Warning: Design contains 1 input pin(s) that do not drive logic Warning (15610): No output...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

I changed VCLK to OUT STD_LOGIC and created a signal to be used instead of VCLK within the process. The signal was assigned to VCLK outside of the process. Unfortunately, it didn't change any of the warning messages that are generated.