Forum Discussion

tlindsay's avatar
tlindsay
Icon for New Contributor rankNew Contributor
5 years ago

NIOS II QSPI reset vector

I want to boot NIOS II from QSPI on a MAX10. I am fallowing these documents as a guideline: Section 5.2.4 from: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/nios2/e...
BDarji's avatar
BDarji
Icon for Occasional Contributor rankOccasional Contributor
5 years ago

Hello,

It looks you have not connected Nios II Instruction master to 'avl_mem' port of that controller. Hence, it is not appearing there.

Thank you.

  • tlindsay's avatar
    tlindsay
    Icon for New Contributor rankNew Contributor
    5 years ago

    *face palm* Thank you BDarji.

    • BoonBengT_Altera's avatar
      BoonBengT_Altera
      Icon for Moderator rankModerator
      4 years ago

      Hi @tlindsay,

      Thank you for posting and sharing the finding in Intel community forum, hope this message find you well and apologies for the delayed in response.
      Good to know that it is working now, since there is no further clarification on, this thread will be transitioned to community support. If you have new queries, please feel free to open a new thread to get support from Intel experts, and we would be right with you. Otherwise, the community users will further help you with doubts in this thread.

      Best Wishes
      BB