Forum Discussion

OLevy1's avatar
OLevy1
Icon for Occasional Contributor rankOccasional Contributor
7 years ago

Native Phy Transceiver rx_cdr_refclk from PLL

hi, in one of me designs i would like to use 2 Native Phy Transceivers to receive 2 different serial information. one of the Native Phy Transceivers rx_ref_clk is from a dedicated pin BUT the other...
CheepinC_altera's avatar
CheepinC_altera
Icon for Regular Contributor rankRegular Contributor
7 years ago
Hi, You are welcome. By the way, you may also look into the external clock cleaner to clean up the PLL output clock before loop back to CDR refclk. Best regards, Chee Pin