Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Multiple slave port in SOPC builder

Hello, I am trying to build a component with multiple slave ports. Therefore, I connected 3 different slave input ports to my component(attachment). But, when I tried to generate the system SOP...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Hi Jerome,

i agree that it must be possible to use multiple ports. I also dont know about the warning with clocks and resets, because they are CLOCK_SINK type.

Here is and attachment of system inter connect. Infact, I started with only one clock. But, when SOPC didnt allow me to do so, I assigned 3 different clocks for 3 different interfaces only to see if it allows now or not.

Best regards.