Forum Discussion

New Contributor

4 years ago

Modelsim: "Unable to replace existing ini file"

Hello, Ever since I upgraded to the latest Quartus Pro Edition (21.2.0), the bundled Modelsim hangs when I compile a Verilog source file and prints out error messages to the console shown below. ...

RichardT_altera

Super Contributor

4 years ago

Hi @mindchasers

I would try to uninstall and re-install the Modelsim.

You can download it from the link below:

https://fpgasoftware.intel.com/21.2/?edition=pro

See if that works for you.

Best Regards,
Richard Tan

p/s: If any answer from the community or Intel support are helpful, please feel free to give Kudos.

mindchasers
New Contributor
4 years ago
I should have mentioned that I had already tried reinstalling it. It didn't make a difference. Thank you.

Forum Discussion

Modelsim: "Unable to replace existing ini file"

Recent Discussions

Automatically added negative node for TDS output doesn't work with Agilex 5

Quartus 20.1std compilation fails for Quartus map - Device 10AS057K2F40I1SG

Duplicate_hierarchy_depth / duplicate_register

QuartusPro 25.3 Crashed after using the Signal Tap Logic Analyzer

Is Quartus Prime Pro 22.4 Compatible with Stratix 10 NX Series Device 1SN21CEU2F55E2VG?