Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

modelsim megawizard dpram no output

first change init_file => "./souce/memory.mif" in dpram_2200.vhd to absolute dir then run modelsim, you will find out that output :vector q are always 0,this is incorrect,for I have init...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Check modelsim compilation report if it sees the memory module and the hex file. Otherwise it will still report success but with memory as black box.