Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

Load a .pof in flash using PFL in command line

Hello, I'd like to program my flash using a .pof file and the parallel flash loader as described here in the application note : AN478 This is working, and I'd like to do the same in command ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

We did solder a 2x5 pins on the JTAG connector as described in the user manual.

I have 2 old cables ByteBlasterMV and ByteBlasterII, but quartus can't find any JTAG chain through this connector ...

That seems I have a serious trouble.

The User manual shows a MAXII in the Jtag chain which I don't see with my USB blaster !