Forum Discussion

New Contributor

7 years ago

Solved

Is there any way to program a MAX9560 using a USB Blaster 2?

I am trying to program a pair of MAX9560s with POF files on legacy hardware. The hardware has been in production since 2000 and the test logic was developed in 2008. In 2008 I used MAX PLUS 2 and a...

ShafiqY_Intel
7 years ago
Hi AGRAN21,
USB Blaster II does not support MAX 9000 series. USB blaster support MAX II, MAX V and MAX 10 device.
For MAX 9000 device, only Byteblaster II cable is supported.
https://www.intel.com/content/altera-www/global/en_us/index/support/support-resources/knowledge-base/solutions/rd11042011_149.html
Thanks.

ShafiqY_Intel

Frequent Contributor

7 years ago

Hi AGRAN21,

USB Blaster II does not support MAX 9000 series. USB blaster support MAX II, MAX V and MAX 10 device.

For MAX 9000 device, only Byteblaster II cable is supported.

https://www.intel.com/content/altera-www/global/en_us/index/support/support-resources/knowledge-base/solutions/rd11042011_149.html

Thanks.

AGRAN21

New Contributor

7 years ago

Hi WolfGang,

Thanks for the confirmation! I'll have to find a ByteBlaster 2 online. I think I still have the old XP computer with MAX+PLUS 2 on it!

Forum Discussion

Is there any way to program a MAX9560 using a USB Blaster 2?

Recent Discussions

submit ticket issues

USB-Blaster II malfunction

Is there any way to script the creation of a signal tap instance?

resource utilization for certain module/component

USB Blaster III and Cyclone III