Forum Discussion

KJalte2's avatar
KJalte2
Icon for Occasional Contributor rankOccasional Contributor
7 years ago

If the logic of an Output pin in the design is set to LOW, and the pin is set to Assignment Editor/Weak Pull-Up Resistor = On in QuartusII, what happens to the I/O pin?

Please refer to the attached file.
AnandRaj_S_Intel's avatar
AnandRaj_S_Intel
Icon for Regular Contributor rankRegular Contributor
7 years ago

Hi,

Output pin in the design is set to LOW, and the pin is set to Assignment Editor/Weak Pull-Up Resistor

>>output is logic Logic LOW.

Output pin in the design is set to HIGH, and the pin is set to Assignment Editor/Weak Pull-Up Resistor

>>output is logic Logic HIGH

Let me know if this has helped resolve the issue you are facing or if you need any further assistance.

regards

Anand.