Forum Discussion

JHUAN157's avatar
JHUAN157
Icon for New Contributor rankNew Contributor
6 years ago

I downloaded Quartus Prime Pro Edition 19.2 and tried to build a project with Stratix device; but I cannot find the Stratix device under Family pull down tab in Family, Device & Board Settings window. All I see is Cyclone 10 GX device. Any suggestion?

Vicky1's avatar
Vicky1
Icon for Regular Contributor rankRegular Contributor
6 years ago

Hi,

After installing the devices, machine needs to be restart to get effect, Have you confirmed?

Quartus Pro 19.2 requires license, please go through the below links & ensure the type of license required for you,

https://www.intel.com/content/www/us/en/programmable/support/support-resources/download/licensing/overview.html

https://www.intel.com/content/www/us/en/programmable/buy/design-software.html

Then apply for the license by using self service licensing center,

https://www.intel.com/content/www/us/en/programmable/documentation/esc1425946071433.html#mwh1410890913760

Regards,

Vicky

  • JHUAN157's avatar
    JHUAN157
    Icon for New Contributor rankNew Contributor
    6 years ago

    Vicky,

    I did restart the computer after installing Quartus Pro 19.2, but the result is the same - no Stratix device is available. Also, at the 'My Altera Software and IP Products' in 'Self Service Licensing Center', Quartus II SE Fixed is under 'Product' column, nothing else. Please see the attached.

    Thanks,

    Jason