Forum Discussion
MohdAnnuar_S_Intel
New Contributor
New ContributorHow to debug jtagconfig not detecting JTAG hardware?
This is seen on quartus prime pro Linux version 16.0.0.211 installed on SLES 11 with udev rules as below: ATTR{idVendor}=="09fb", ATTR{idProduct}=="6810", ACTION=="add", RUN+="/bin/sh -c 'chmod 666 ...
YuanLi_S_Intel
Regular Contributor
Regular ContributorHi Suhaini,
You will need to add rule depending on the linux version. You may refer to link below for the guide to setup USB Blaster II in Linux:
https://rocketboards.org/foswiki/Documentation/UsingUSBBlasterUnderLinux
Regards,
YL
