How to change values of registers in a design from PC using UART /USB (without reprogramming)

Question

I have a design and there are some registers that need to be initialized/changed as user needs. I need the flexibility to initialize/change these registers with the PC without reprogramming. What should be the approach?

yuanli_s_intel · Answer

Hi Jay,Apologize that there is no way to do that. However, you can program partially with partial reconfiguration. Since you are not attaching any devices, thus i am taking Arria 10 as example:https://www.intel.com/content/www/us/en/programmable/documentation/ihj1482170009390.htmlThank You.

Forum Discussion

How to change values of registers in a design from PC using UART /USB (without reprogramming)

1 Reply

Recent Discussions

How-to generate dual-port (read/write) RAM with clock enables

SDC_ENTITY_FILE critical warnings

GTS SDI II IP Core not producing correct tx_vid_clkout frequency

Quartus 20.1std compilation fails for Quartus map - Device 10AS057K2F40I1SG

Failing IO buffer