Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Gate level Simulation passes but design fails on target borad

Hello, I am implementing a filter (2nd order) in Quartus Stratix II device running at 500KHz. I simulated the design using ModelSim. My Target hardware consists of stratix II device. Input...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Hello,

Please find the info as follows:

The sampling freq = 500 KHz.

-- coefficients for 100 Hz

coeff_b1 <= x"3FFE25B1";

coeff_b2 <= x"800424A3";

coeff_b3 <= x"3FFDBC4B";

coeff_a2 <= x"800424A3";

coeff_a3 <= x"3FFBE1FD";

Thanks.