Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Flash interface problem

Hi everybody, I am trying to burn my design in to the on-board Flash but there are a couple of things that I cant understand. The Stratix II (EP2S60ESF672C5) development board that I have got...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

a) AM I right to think that these data/address lines are not auto connected by the SOPC builder and have to be assigned to the Stratix II device pins using Assignment -> pins?

Yes, you are right and you have to. Your assignments have to be consistent with physical pin connections on the dev board. You can find the physical pin connections of the board from the user manual or user guide of the dev board.