ERROR IN MODELSIM

can you share the step on how you generate the example design and step for you to run the simulation?

I tried to run the simulation using Q191 and modelsim_se2019.2 and I can run the simulation successful.

The step i used:

generate the example design, open modelsim and cd into pcie_example_design_tb\pcie_example_design_tb\sim\mentor

source msim_setup.tcl

ld_debug

add simulation waveform

run -all

and here is the end of its transcript:

# INFO: 77264 ns Passed: 0004 same bytes in BFM mem addr 0x00000040 and 0x00000840

# INFO: 77840 ns Passed: 0004 same bytes in BFM mem addr 0x00000040 and 0x00000840

# INFO: 78424 ns Passed: 0004 same bytes in BFM mem addr 0x00000040 and 0x00000840

# INFO: 79008 ns Passed: 0004 same bytes in BFM mem addr 0x00000040 and 0x00000840

# INFO: 79600 ns Passed: 0004 same bytes in BFM mem addr 0x00000040 and 0x00000840

# INFO: 80184 ns Passed: 0004 same bytes in BFM mem addr 0x00000040 and 0x00000840

# INFO: 80752 ns Passed: 0004 same bytes in BFM mem addr 0x00000040 and 0x00000840

# INFO: 81320 ns Passed: 0004 same bytes in BFM mem addr 0x00000040 and 0x00000840

# INFO: 81888 ns Passed: 0004 same bytes in BFM mem addr 0x00000040 and 0x00000840

# INFO: 82456 ns Passed: 0004 same bytes in BFM mem addr 0x00000040 and 0x00000840

# SUCCESS: Simulation stopped due to successful completion!

# Simulation passed