Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

Error: Erase failed at offset 0,

Info: Using cable "USB-Blaster [USB-0]", device 1, instance 0x00 Info: Resetting and pausing target processor: OK Info: Reading System ID at address 0x00001828: verified Info: Info: : Checks...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

--- Quote Start ---

are you sure that the EPCS controller is at address 0x0 in your SOPC system?

--- Quote End ---

Yes，EPCS address is locked at 0x0.And the reset is epcs,exception is SDRAM.