Error during compilation

--- Quote Start ---

Hello Friends,

I am compiling a project in Quartus 10.1SP1. The targeted chip is EP2AGX125DF25I3. It is giving me the following error -

"Error: There is no valid device available". I am using the web-edition of Quartus. Are there some limitations in this and is the error due to this? When I change the device it is compiling correctly with no errors (but with warnings).

Can anyone advice me?

Regards,

Vinod.

--- Quote End ---

Hi,

the web edition supports only Arria II GX FPGAs: EP2AGX45, EP2AGX65.

Have a look to : http://www.altera.com/literature/po/ss_quartussevswe.pdf

Kind regards

GPK

hi every one

i have a problem in compiling 4bit adder using vhdl in quartus 2 10.1 cyclone 2 ep2c35f672c6

Library ieee;

Use ieee.std_logic_1164.all;

Entity 4bitadder is -- it is showing error here

Port

(

I0,I1 : in STD_LOGIC_VECTOR(3 downto 0);

Cin : in STD_LOGIC;

S : out STD_LOGIC_VECTOR(3 downto 0);

Cout : out STD_LOGIC

);

End 4bitadder;

Architecture arch of 4bitadder is -- it is showing error h

Component fulladder

Port

(

A,B,Cin : in std_logic;

S,Cout : out std_logic

);

End component;

Signal Temp : STD_LOGIC_VECTOR(2 downto 0);

begin

FA1: fulladder port map

(

A => I0(0),

B => I1(0),

Cin => Cin,

S => S(0),

Cout => Temp(0)

);

FA2: fulladder port map

(

A => I0(1),

B => I1(1),

Cin => Temp(0),

S => S(1),

Cout => Temp(1)

);

FA3: Fulladder port map

(

A => I0(2),

B => I1(2),

Cin => Temp(1),

S => S(2),

Cout => Temp(2)

);

FA4: fulladder port map

(

A => I0(3),

B => I1(3),

Cin => Temp(2),

S => S(3),

Cout => Cout

);

End arch;

wheather i have to include 1 bit adder in this file or as an another file when using component instantiation please tell me that

my errors are

Error (10500): VHDL syntax error at 4bitadder.vhd(4) near text "4"; expecting an identifier

Error (10500): VHDL syntax error at 4bitadder.vhd(14) near text "4"; expecting an identifier

please help me as soon as possible.