Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorDE1 / Cyclone II with Quartus II (v15)?
Hello everyone!
I just dug out a DE1* board I used for some projects during college, hoping to use it for an upcoming DIY project. Downloaded and Installed the latest Quartus II software, only to find there's no mention of the older Cyclone 2 devices. So - how do I add device support for Cyclone-2 in Quartus? Thanks! *DE1 from Terasic: http://www.terasic.com.tw/cgi-bin/page/archive.pl?language=english&categoryno=53&no=83&partno=63 Replies
Altera_ForumCyclone II is not supported by the latest version of the tools.
Goto Altera's download center (https://www.altera.com/downloads/download-center.html). Click on the 'Select by Device' tab, select Cyclone II and it'll point you at the version you need. Looks like you need Quartus 13.0 sp1. Cheers, Alex- Altera_Forum
The latest Quartus version supporting Cyclone II family is 13.0
Refer to this page for detailed information about device support in Quartus: https://www.altera.com/downloads/download-center.html - Altera_Forum
Awesome!
Couldn't locate that page earlier. For some reason all /searches for/ DE1 keep going to the (newer) DE1-SOC. Thanks, Cris72 and Alex.
