Forum Discussion

aejjeh's avatar
aejjeh
Icon for New Contributor rankNew Contributor
7 years ago
Solved

Case #: 00288368 - Unable to configure Arria 10 GX FPGA Development Kit for OpenCL

I am trying to configure our Intel Arria 10 GX FPGA Development Kit for use with the OpenCL SDK by following thefollowing guide. I am able to reach "Installing the OpenCL Runtime Driver - step 3". Ho...
SSFyTMT's avatar
SSFyTMT
Icon for New Contributor rankNew Contributor
7 years ago

I have the nearly the same issue. I'm using tool version 17.1.2 on Ubuntu 16.04. I've also tried this under windows 7 using 17.1.2. But this issue is present from a fresh install.

Is it possible the JTAG'd FPGA image is being blown away in the "warm reboot" step. So that when the PCIe bus is re-enumerated - there is nothing to recognize? I've also tried to skip the warm reboot step and rescan the PCIe bus using "sudo bash -c 'echo 1 > /sys/bus/pci/rescan'" - still no luck getting aocl diagnose or aocl list-devices to recognize the board.

Any help on this issue? Any way to flash the device with the .aocx file through the Quartus GUI?