Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

Can't get Quartus Prime Standard 16.1 to output SDF

I'm trying to get Quartus Prime Standard 16.1 to output SDF in order to do a gate-level simulation (in Modelsim). I have a detailed set of instructions, which were last updated for Quartus (II/Prime?...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

What device? I believe gate-level timing simulations are not supported in most newer devices. They take too long and don't show anything that wouldn't come up in an RTL simulation and static timing analysis, so people stopped doing them.