Forum Discussion

drbarryh's avatar
drbarryh
Icon for Occasional Contributor rankOccasional Contributor
22 days ago
Solved

Automatic address range assignment ?

Hello Altera Experts,

I have a question about IP address range assignments when using Platform Designer. When i add IP to my Platform is there a way to get the tool to automatically assign non-overlapping address ranges to each IP ? At the moment when i add different IPs to my Platform they all overlap and so i have to go in to the address tab and manually assign each IP address range to make sure they don't overlap and thus causes errors.

Thanks for your help,

Barry

 

Platform

6 Replies

    • drbarryh's avatar
      drbarryh
      Icon for Occasional Contributor rankOccasional Contributor
      19 days ago

      Hi Kenny, thanks for the enquiry and no i think sstrell answered my question, unless there is something else you would like to add ?

      best regards,,

      Barry

      • KennyT_altera's avatar
        KennyT_altera
        Icon for Super Contributor rankSuper Contributor
        15 days ago

        Could you help us tag the Quartus version and device used above? This information will assist us in performing analysis in the future.


         

  • sstrell's avatar
    sstrell
    Icon for Super Contributor rankSuper Contributor
    21 days ago

    Yes.  System menu -> Assign Base Addresses

    • drbarryh's avatar
      drbarryh
      Icon for Occasional Contributor rankOccasional Contributor
      19 days ago

      Hi sstrell, right thanks for the help. I will use that method from now on.

      best regards,

      Barry