Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Arria10GX aocl diagnose failed

Hi I'm using aocl 17.0.0.290 on Windows10 with Arria 10 GX kit. I configured the board according to the menu (https://www.altera.com/content/dam/altera-www/global/en_us/pdfs/literature/an/an807....
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Ok after more then 10 times of reinstall, reboot, program flash memory... finally found the problem.

I'm using windows10 which enforce driver signature verification, so I disable it by entering the test mode.

But that's not enough, for some reason it only allowed you to install kernel driver module but not the board driver. I have to use the Advanced Boot Option to disable driver signature verification, then when installing board driver it will ask you twice if you want to install non-signature driver.

Technically not Altera's problem, and they did tell you to disable driver signature verification on this page (https://www.altera.com/support/support-resources/knowledge-base/solutions/fb321729.html), but the message return 0 error and install successfully is quite misleading..