Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

Altclkctrl ip

Hi, I am using ALTCLKCTRL to mux two clock signals. One of the signal is a PLL output and the other one is an from the clock pin. I get an error from the fitter stating that it cannot place...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

I have 16.1 open for a Cyclone V project, and was able to find ALTCLKCRL under Basic Functions -> Clocks, PLLs and Resets. It's right above the "Altera PLL" IP.