Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

a strange problem about PLL output

When using PLL megafunction , I set input clk 15.36MHz ,c1 out 92.16MHz and c2 out 30.72MHz. But after full compilation ,the Timing Analyzer in Compilation report showed the c1 out changed to be 92.1...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Not exact, but not completely wrong. As said, there's no specified accuracy for this message.