Forum Discussion

aiedb's avatar
aiedb
Icon for Occasional Contributor rankOccasional Contributor
1 month ago

USING SIGNAL TAP TO MONOTOR AVALON_BUS WITH NIOS DESIGN

hii  i need to use signal tap to see what's happening on avalon bus , i have a qsys system that is working fine , its the remote update example , and when i add  a signal tap file and add for exampl...
Nios Architecture
aiedb's avatar
aiedb
Icon for Occasional Contributor rankOccasional Contributor
1 month ago

hii thanks for your reply and help , i did something that i expected it will work but i didn't.

i added signal tap to the design and compiled the design converted it into pof file type , and programmed it to cfm0 and didn't work , but when i programmed my max10 with a sof file i managed  to monitor the signals of the avalon bus on the on chip flash ip , but all of the above are helpfull tips , hope it will help me in future designs. 

BoonBengT_Altera's avatar
BoonBengT_Altera
Icon for Moderator rankModerator
1 month ago

Hi aiedb ,

 

I hope you’re doing well. I wanted to follow up and check if there are any remaining questions or concerns regarding this matter. 

Please let us know if anything still needs clarification — we’re happy to assist further.

Thank you for your time, and we look forward to your feedback.

 

Best Wishes

BB

  • BoonBengT_Altera's avatar
    BoonBengT_Altera
    Icon for Moderator rankModerator
    1 month ago

    Hi aiedb,

     

    Greetings, as we do not receive any further clarification/updates on the matter, hence would assume challenge are overcome. We will continue to monitor this post for the next 5 days. If there are no further inquiries during this period, I will step back and allow the community to assist with any future follow-up questions.

    Thank you for engaging with us!

     

    Best regards,
    Altera Technical Support