Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
19 years ago

USB device!

I have a usb flash disk, I want to using it on my board, I choose USB Mass storage and SCSI disk and ISA116X driver support in menuconfig. Start uClinux on NIOS II SDK shell, using dmesg, I got these message:

# dmesg

Linux version 2.6.11-uc0 (root@localhost.localdomain) (gcc version 3.4.6)# 11 Sa

t Apr 15 17:52:30 CST 2006

uClinux/Nios II

Altera Nios II support © 2004 Microtronix Datacom Ltd.

setup_arch: No persistant network settings signature at 008F0000

On node 0 totalpages: 2048

DMA zone: 2048 pages, LIFO batch:1

Normal zone: 0 pages, LIFO batch:1

HighMem zone: 0 pages, LIFO batch:1

Built 1 zonelists

Kernel command line:

PID hash table entries: 64 (order: 6, 1024 bytes)

Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)

Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)

Memory available: 6188k/8192k RAM, 0k/0k ROM (1334k kernel code, 551k data)

Calibrating delay loop... 24.72 BogoMIPS (lpj=123648)

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

NET: Registered protocol family 16

SCSI subsystem initialized

usbcore: registered new driver usbfs

usbcore: registered new driver hub

Serial: JTAG UART driver $Revision: 1.4 $

ttyJ0 at MMIO 0x81004000 (irq = 1) is a jtag_uart

io scheduler noop registered

io scheduler deadline registered

dmfe_probe:eth0, 50000 Khz Nios

<DM9000> eth0 I/O: 80900090, VID: 90000a46

ADDR: 00:07:ed:00:00:00

dmfe_probe:eth1, 50000 Khz Nios

Linux video capture interface: v1.00

116x: driver isp116x-hcd, 08 Apr 2005

116x: ISP116x Host Controller, irq 4

isp116x-hcd isp116x-hcd: new USB bus registered, assigned bus number 1

116x: Invalid chip ID 3630

isp116x-hcd isp116x-hcd: USB bus 1 deregistered

116x: init error, -19

Initializing USB Mass Storage driver...

usbcore: registered new driver usb-storage

USB Mass Storage support registered.

NET: Registered protocol family 2

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP established hash table entries: 512 (order: 0, 4096 bytes)

TCP bind hash table entries: 512 (order: -1, 2048 bytes)

TCP: Hash tables configured (established 512 bind 512)

NET: Registered protocol family 1

NET: Registered protocol family 17

Freeing unused kernel memory: 436k freed (0x15e000 - 0x1ca000)#

I plug my usb flash disk in my board usb host port, there is no message appear!

How could I to find the usb disk?

43 Replies

Show More
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    19 years ago

    --- Quote Start ---

    originally posted by goral@Apr 28 2006, 07:33 AM

    i&#39;m glad to hear your success, maybe you could try your thought, i didn&#39;t do that, i want to using the usb host port for my camera, if you interesting, we can help each other!

    are u want to try?

    <div align='right'><{post_snapback}> (index.php?act=findpost&pid=14818)

    --- quote end ---

    --- Quote End ---

    hi groal

    OK,we can discuss usb port for camera and help each other.

    what kind of purposes do you want to implement on DE2 board ?

    my lab have two 1.3Mega Pixel Digital Camera modules for DE2 ,and can implement real-time movement detecting . my classmate want to use usb camera that implement the same purpose.

    so, do you have interests in real-time movement detecting with using usb camera ?
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    19 years ago

    <div class='quotetop'>QUOTE </div>

    --- Quote Start ---

    hi groal

    OK,we can discuss usb port for camera and help each other.

    what kind of purposes do you want to implement on DE2 board ?

    my lab have two 1.3Mega Pixel Digital Camera modules for DE2 ,and can implement real-time movement detecting . my classmate want to use usb camera that implement the same purpose.

    so, do you have interests in real-time movement detecting with using usb camera ?[/b]

    --- Quote End ---

    Hi : jay_1025

    Thanks for your enjoy, I didn&#39;t so high Pixel Digital Camera modules, today I buy a 0.3Mega Pixel Digitial Camera which using ov511 IC on a onilne shop, Maybe 2-days later I will do my lab continue, I read some program for capture video data such as V4L now, I want to capture some video and compress them by some mpga4 algorithm and storage them in USB flash disk, and then I want to see the realtime video on my tuochscreens or transform on the internet.

    Maybe like a video phone http://forum.niosforum.com/work2/style_emoticons/<#EMO_DIR#>/smile.gif ,Like as I done on ARM9 platform before!

    We can help each other!

    Regards!
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    19 years ago

    --- Quote Start ---

    originally posted by goral@Apr 30 2006, 07:48 AM

    <div class='quotetop'>quote

    --- quote end ---

    --- quote start ---

    hi groal

    ok,we can discuss usb port for camera and help each other.

    what kind of purposes do you want to implement on de2 board ?

    my lab have two 1.3mega pixel digital camera modules for de2 ,and can implement real-time movement detecting . my classmate want to use usb camera that implement the same purpose.

    so, do you have interests in real-time movement detecting with using usb camera ?

    --- Quote End ---

    Hi : jay_1025

    Thanks for your enjoy, I didn&#39;t so high Pixel Digital Camera modules, today I buy a 0.3Mega Pixel Digitial Camera which using ov511 IC on a onilne shop, Maybe 2-days later I will do my lab continue, I read some program for capture video data such as V4L now, I want to capture some video and compress them by some mpga4 algorithm and storage them in USB flash disk, and then I want to see the realtime video on my tuochscreens or transform on the internet.

    Maybe like a video phone http://forum.niosforum.com/work2/style_emoticons/<#EMO_DIR#>/smile.gif ,Like as I done on ARM9 platform before!

    We can help each other!

    Regards!

    <div align='right'><{post_snapback}> (index.php?act=findpost&pid=14864)</div>

    [/b]

    --- Quote End ---

    Just one question : if you have already done this work on an ARM9 platform, why do you want to port this to the NIOS platform ? http://forum.niosforum.com/work2/style_emoticons/<#EMO_DIR#>/rolleyes.gif
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    19 years ago

    <div class='quotetop'>QUOTE </div>

    --- Quote Start ---

    Just one question : if you have already done this work on an ARM9 platform, why do you want to port this to the NIOS platform ? rolleyes.gif[/b]

    --- Quote End ---

    Hi bigboss25:

    Its a very fun question, my answer is very simple, I&#39;m a student in a college, I want to master more knowledge only!

    I want to contrast the different platform, now I prefer like nios, Its full of Challenge when I solve some problem, In furture, I think NIOS will have a good chance in many areas, if we can intergate two or more CPU on our FPGA ,lsuch as DSP or other . We&#39;ll get the most effective than other singel CPU platform. http://forum.niosforum.com/work2/style_emoticons/<#EMO_DIR#>/biggrin.gif
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    19 years ago

    --- Quote Start ---

    originally posted by goral@Apr 30 2006, 09:21 AM

    <div class='quotetop'>quote

    --- quote end ---

    --- quote start ---

    just one question : if you have already done this work on an arm9 platform, why do you want to port this to the nios platform ? rolleyes.gif

    --- Quote End ---

    Hi bigboss25:

    Its a very fun question, my answer is very simple, I&#39;m a student in a college, I want to master more knowledge only!

    I want to contrast the different platform, now I prefer like nios, Its full of Challenge when I solve some problem, In furture, I think NIOS will have a good chance in many areas, if we can intergate two or more CPU on our FPGA ,lsuch as DSP or other . We&#39;ll get the most effective than other singel CPU platform. http://forum.niosforum.com/work2/style_emoticons/<#EMO_DIR#>/biggrin.gif

    <div align='right'><{post_snapback}> (index.php?act=findpost&pid=14866)</div>

    [/b]

    --- Quote End ---

    Hi Goral,

    you seems to be already a wise man, and I totally agree with you http://forum.niosforum.com/work2/style_emoticons/<#EMO_DIR#>/biggrin.gif .

    I&#39;ve the same point of view but do you think NIOS can compete with ARM9 ?

    Can you explain your preference for NIOS ?

    Regards.
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    19 years ago

    <div class='quotetop'>QUOTE </div>

    --- Quote Start ---

    Hi Goral,

    you seems to be already a wise man, and I totally agree with you biggrin.gif .

    I&#39;ve the same point of view but do you think NIOS can compete with ARM9 ?

    Can you explain your preference for NIOS ?

    Regards.[/b]

    --- Quote End ---

    Hi bigboss25

    Thanks for your Praise&#65292; http://forum.niosforum.com/work2/style_emoticons/<#EMO_DIR#>/rolleyes.gif

    Of course I think NIOS must be compete with ARM, but NIOS must be advantage itself in furture. I&#39;m a new man about NIOS and uCliunx, so I want to using NIOS&uClinux to achieve a video phone or other usful thing.

    If you are interestig NIOS & uCLinux, We can help each other! Could I search help for you when I occur some problem?

    Regards!
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    19 years ago

    hi qoral

    i have TRDB_DC2 hareware module support the DE2 board, but i don&#39;t add TRDB_DC2 hardware to Nios2 cpu in SOPC Builder yet.

    i don&#39;t seems easy to add it with nios2 cpu in SOPC builder.

    Do you know how to add it with nios2 cpu in SOPC builder ?

    if you want to try it and i will send hardware project(without nios2 cpu) to you.

    Reference design website for DE2

    trdb_dc2 - 1.3mega pixel digital camera module for de2/trex c1 (http://www.terasic.com.tw/cgi-bin/page/archive.pl?language=english&categoryno=39&no=50)

    jay
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    19 years ago

    hi

    i tried out the new isp1362-hcd.c changes and uclinux boots up nicely - thx goral and jay_1025!

    i can see the files on my usb stick now, thx guys!

    shindou
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    19 years ago

    <div class='quotetop'>QUOTE </div>

    --- Quote Start ---

    hi qoral

    i have TRDB_DC2 hareware module support the DE2 board, but i don&#39;t add TRDB_DC2 hardware to Nios2 cpu in SOPC Builder yet.

    i don&#39;t seems easy to add it with nios2 cpu in SOPC builder.

    Do you know how to add it with nios2 cpu in SOPC builder ?

    if you want to try it and i will send hardware project(without nios2 cpu) to you.

    Reference design website for DE2

    TRDB_DC2 - 1.3Mega Pixel Digital Camera Module for DE2/TREX C1

    jay[/b]

    --- Quote End ---

    Hi jay_1025

    I&#39;m I dodn&#39;t have TRDB_DC2 - 1.3Mega Pixel Digital Camera Module, and I haven&#39;t any resource about it. So I couldn&#39;t do it now http://forum.niosforum.com/work2/style_emoticons/<#EMO_DIR#>/sad.gif