Forum Discussion

VCham's avatar
VCham
Icon for Occasional Contributor rankOccasional Contributor
6 years ago

UART Core with NIOS issue

I have added the standard UART Core to my Cyclone V Quartus project and have connected it to NIOS. The other end of the UART interface is connected to my computer and I use PuTTY. I am able to tran...
VCham's avatar
VCham
Icon for Occasional Contributor rankOccasional Contributor
6 years ago

Hi Eliath,

Thanks for the info. However, I was able to solve this without using interrupts by writing 0x0 to the Control Register during initialization. Not sure why that worked but the same script I posted above now consistently receives and prints all bytes that get sent to it.