Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
20 years ago

SOPC 5.0 Compile error?

Hello,

I get a very strange message during SOPC compilation that occurs during the

generation of the CPU:

The message is :

ERROR: In object ' ' of class e_dpram: can't access 'read_during_write_mode_mixed_ports' field

known fields are:

_AUTOLOAD_ACCEPT_ALL

_module_name

_already_declared_file...... this goes on for awhile.

I double checked my system, which is a standard C20 build with an added DMA.

I am using SOPC 5.0 to target and Altera Cyclone C20 dev board.

Any tips appreciated.

Thanks,

-Ray

11 Replies

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    20 years ago

    Try closing and opening SOPC Builder. Also, if your cpu was generated with a previous version, you could try deleting and re-adding it in 5.0.

    Cheers,

    - slacker
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    20 years ago

    Sounds like you are suffering from version-itis.

    You are using a Nios II 5.0 with an older version of SOPC Builder (which comes bundled with Quartus).

    Contact your Altera representative and ask for the latest version of Quartus 5.0.
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    20 years ago

    Hello,

    Thanks for your inputs.

    I had tried reopening projecgt several times, problem persists.

    Also, I am using with Nios II 5.0, Quartus 5(beta) SOPC Builder 5 build 91.

    Still puzzled?

    -Ray
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    20 years ago

    Your Quartus 5.0 build 91 is too old.

    You'll need to get a more recent version.
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    20 years ago

    Thanks for tip James.

    I went and picked up build 134, supposed to be latest and see a new type of problem. Whereas before, I would see the cryptic error, now with build 134, the compile seems to get stuck during the arbitration build phase.

    I sent the earlier problem to Altera support and they have an SR bug on it.

    Thanks,

    -Ray
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    20 years ago

    I would like to know that as well, can you download a beta build somewhere?

  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    20 years ago

    Hello,

    I do not believe that 5.0 has been released for general consumption yet. I got a 5.0 beta because I needed to compile for a new Cyclone II board that my company is working on.

    What I am really trying to do now is test the speed of DMA accesses with 5.0, but I get first the strange error with build 91 and then the stall with SOPC build 134.

    I might start a new thread to discuss this.

    -Ray
  • Altera_Forum's avatar
    Altera_Forum
    Icon for Honored Contributor rankHonored Contributor
    20 years ago

    Hi Ray,

    Ok, understood ;-)

    Well we are much closer to being done with 5.0 -- I suggest that if you haven't already done so, obtain a more recent copy and that should clear things up.. these sorts of things are not uncommon in early pre-release builds and (should) get caught by the QA process. There was a problem of arbitration generation taking a while, depending on the system, that could take system generation take quite a long time (but not stuck forever as you describe) -- this was recently addressed.